4 L / 5 L Edible Oil / Water Bottle Blow Moulding Machine
This series is widely used for making PET bottle for drinking water, edible oil, food, daily chemical……ect.
Performance and Characteristics
1. 63mm pitched, more preforms are uninterruptedly heated within the same distance, which improves the efficiency and
energy saving.
2.The thermostatic heating system ensure that the heating temperature of each preform surface and internal is uniform. Hinged
oven holders make it easy for the operators to change infrared tubes and do maintenance.
3.The Servo driven the molding mechanism, triggering off the linkage to the bottom mold. The application of high speed
precision blowing valve unit helps to make high capacity.
4.Being highly intelligent, the machine is equipped with the units of preform temperature detection, leaking bottle detection and
rejection as well as jammed air conveyor detection, ect, which ensures the machine work efficiently and stably.
5. High pressure blowing air recovery system saves up to 30% of HPC air.
6. Operation on the touch screen is simple and easy.
Technician Parameter
| Items |
Unit |
Moldel |
| RiBo-3R5L |
| Molding Spec. |
Preform Pitch |
mm |
190 |
| Preform Heating Pitch |
mm |
63.5 |
| No.of Cav. |
cav. |
3 |
| Container Spec. |
Max.Container Volume |
L |
5 |
| Neck Diameter Range |
mm |
39~45 |
| Support ring diameter |
mm |
57 |
| Max.Containr Diameter |
|
180 |
| Max.Containr Height |
mm |
330 |
| ※※Theoretical Output |
bph |
3600~3000 |
| Power Spec. |
Rated Power |
KW |
118 |
| Power Consumption |
KW |
46~56 |
| Compressor Spec. |
Blowing Pressure |
Mpa |
2.8~3.5 |
| Air Consuming |
m³/min |
9 |
| Main Machine Spec. |
Size |
mm |
7200*3435*3300 |
| Weight |
Kg |
8000 |
| Note: Due to continuous technical development specification would be improved without prior notice. |
| Special designs correspond to customers needs. |
Product Tags:
|
|
4L 5L Bottle Blow Molding Machine , Drinking Water Bottle Manufacturing Machine Images
|
